Cypress Media Inc. offers custom T-shirt Embroidery service. We have 64 heads of embroidery on 8 machines. We operate our embroidery department 24 hours a day so we can get even your largest jobs done quickly.
We also offer the following services to complete your apparel embroidery requirements.
- Size stickers
- Shirt folding
We offer the latest in embroidery and embellishment techniques, all delivered quickly and precisely by the top t-shirt embroidery industry experts on the West Coast.
Basic Apparel Embroidery Guidelines
General Embroidery Guidelines
- All text should be a minimum of 3/16″ tall to look OK and ¼” to look great! You also want the width of the stitch to be a minimum of 1/16″ wide.
- Outlined text should be a minimum of ½” tall
- Large areas of fill should be avoided on light weight garments
- Shadows and blending are difficult to reproduce with embroidery but can be done very well in larger areas of fill. This should only be attempted by an experienced digitizer.
- Vector based EPS files are the best and safest way to provide artwork to your embroidery company but you can also supply almost any file format we can open. The larger and cleaner the file, the better the quality of the final result. Make sure ALL text is outlined to avoid having the fonts changed when the file is opened on different systems. Also embedding the PMS colors in the file is always a good idea.
- Whenever possible provide thread colors. PMS colors are a good second choice if you cannot provide the actual thread colors.
- Have as much information on your PO as possible. When a logo is being digitized it is very important we know what type of fabric it will be going on and if it is going on a hat. It is best to have a file digitized for a hat if some time in the future you think you may be embroidering hats. If possible try and send a sample in advance of the order so we can run it on the actual fabric.
Embroidery for Polo Shirts
- For pique and most open knits ¼” text is recommended. Bigger is always better.
- Standard size for a left chest design is 2-1/2″ – 4″ wide x 1″ – 2″ tall. For larger size logos the sleeve or back yoke is recommended. You can go as large as 5″ wide x 3″ tall on the sleeve on a larger garment but we recommend 3″ wide and no wider than 3.5″. You always want to take into account the smallest size product in the order when determining embroidery size. Cuff embroidery may work on a large men’s shirt but when you get down to a women’s small it may not work.
- Striped shirts need to be high quality. Adding embroidery to a shirt that has been manufactured with crooked lines will make the defect even more noticeable. This is also true of pocketed shirts, where the pocket has been sewn on crooked.
Embroidery for Caps and Hats
- Text should be a minimum of ¼” tall
- Very small text may sink in to the seam on the front of a cap
- Max size for the front of a cap is 4.25″-4.5″ wide x 2-1/2″ tall.
- Max size for the back of a cap is 2-1/2″ wide x 1-1/2″ tall for a graphic, and 4-1/4″ wide x ½” tall for text wrapped around arch.
- Max size for the side of a cap is 2-1/2″ x 1″
- Low quality caps embroider poorly as they are not made from consistent components
Embroidery for Bags
- Always send a sample. It is very difficult to tell if a bag can be embroidered without actually seeing it and attempting to hoop it. Between zippers, linings, buttons and hidden pockets we can never be sure without seeing the bag.
- To determine if a product can be embroidered we check that we can hoop the product and then ensure that the machine head has enough space to move the length of the logo.